I CT For

 photo CTBlinkieGothbyGaby-vi_zps461ff324.gif
 photo N1njLJt_zpsffhdmucx.gif

Facebook

Tuesday, December 12, 2017

XMAS GINGER



Supplies needed:

I am using the stunning artwork from Lady Mishka for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Xmas Ginger" which you can get by going here

Winter Mask 3 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 10, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 8 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 5

Select invert, delete, select none

Move paper layer below frame layer

Select Frame Element 3 - resize by 60%

Paste and position in the center of the canvas above the frame

Select Berries 2 Element - resize by 40%

Paste and position on the top right

Select Tree 4 Element - resize by 50%

Paste and position on the left side

Select Ginger House Element - resize by 40%

Paste and position on the right side

Select WA Element - resize by 30%

Paste and position on the top left

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 3)

Select Carpet Element - resize by 65%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Charm Element - resize by 75%

Paste and position on the bottom right

Select Cup 2 Element - resize by 40%

Paste and position on the bottom right

Select Bells Element - resize by 25%

Paste and position on the bottom right

Select Gift 3 Element - resize by 40%

Paste and position on the bottom

Select Candy 2 Element - resize by 65%

Paste and position on the bottom

Select Cat Element - resize by 25%

Paste and paste on the bottom

Select Ball 5 Element - resize by 25%

Paste and position on the bottom

Select Candy Element - resize by 30%

Paste and position on the bottom

Select Cookie Element - resize by 40%

Paste and position on the bottom left

Select Puppy Element - resize by 25%

Paste and position on the bottom

Select Sparkles Element - resize by 50%

Paste and position on the canvas where desired

Paste paper 2 on the canvas

Apply Mask 3 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 9, 2017

QUEEN OF HEARTS



Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Lil Mz Brainstorm called "Queen of Hearts" which you can get by going here

Mask 315 from Aqua which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 9, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 26 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 14

Select invert, delete, select none

Move paper layer below frame layer

Select Element 37 - resize by 65%

Paste and position on the top left below the frame

Select Element 89 - resize by 65%

Paste and position on the top right below frame

Select Element 67 -

Paste and position on the bottom below the frame

Select Element 106 - resize by 30%

Paste and position on the bottom right

Select Element 52 - resize by 40%

Paste and position on the left side of the frame

Select Element 41 - resize by 20%

Image mirror and paste on the bottom left

Select Element 28 - resize by 50%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 8 - resize by 15%

Paste and position on the bottom right

Select Element 107 - resize by 25%

Paste and position on the bottom right

Select Element 11 - resize by 15%

Paste and position on the bottom right

Select Element 105 - resize by 30%

Paste and position on the bottom

Select Element 108 - resize by 20%

Paste and paste on the bottom

Select Element 91 - resize by 30%

Paste and position on the bottom

Select Element 59 - resize by 20%

Paste and position on the bottom

Select Element 10 - resize by 20%

Paste and position on the bottom

Select Element 15 - resize by 20%

Paste and position on the bottom

Select Element 9 - resize by 50%

Paste and position on the canvas where desired

Paste paper 8 on the canvas

Apply Mask 315 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, December 3, 2017

HOLIDAY GLAM



Supplies needed:

I am using the stunning artwork from Julia Fox for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Mariel Designs called "Becki 6" which you can get by going here

Mask 2 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 3, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 3 -

Paste and position in the center of the canvas

Select Frame Element 6 - resize by 85%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 1

Select invert, delete, select none

Move paper layer below frame layer

Select Element 77 -

Paste and position above frame layer

Select Element 103 -

Paste and position on the top left

Select Element 104 -

Paste and position on the right side

Select Element 23 - resize by 30%

Paste and position on the bottom

Select Element 7 - resize by 25%

Paste and position on the top right

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 37 - resize by 15%

Paste and position on the bottom left

Select Element 52 - resize by 15%

Paste and position on the bottom left

Select Element 22 - resize by 15%

Paste and position on the bottom left

Select Element 87 - resize by 15%

Paste and position on the bottom left

Select Element 48 - resize by 20%

Paste and position on the bottom

Select Element 105 - resize by 20%

Paste and paste on the bottom

Select Element 21 - resize by 15%

Paste and position on the bottom

Select Element 39 - resize by 30%

Paste and position on the bottom right

Select Element 55 - resize by 20%

Paste and position on the bottom right

Select Element 80 - resize by 15%

Paste and position on the bottom right

Select Element 68 - resize by 30%

Paste and position on the bottom

Select Element 91 - resize by 20%

Paste and position on the bottom

Select Element 94 - resize by 15%

Paste and position on the bottom

Select Element 73 - resize by 50%

Paste and position on the canvas where desired

Paste paper 2 on the canvas

Apply Mask 2 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Saturday, December 2, 2017

ARTIC QUEEN



Supplies needed:

I am using the stunning artwork from Danny Lee for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Penguin Queen" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on December 2, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 17

Paste and position in the center of the canvas

Move paper layer below frame layer

Select Element 59 - resize by 50%

Paste and position on the right side

Select Element 12 - resize by 25%

Paste and position on the bottom right

Select Element 60 - resize by 20%

Paste and position on the right side

Select Element 42- resize by 45%

Paste and position on the bottom

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 15 - resize by 25%

Paste and position on the bottom left

Select Element 65 - resize by 30%

Paste and position on the bottom left

Select Element 5 - resize by 15%

Paste and position on the bottom left

Select Element 56 -

Paste and position on the left side

Select Element 66 - resize by 12%

Paste and paste on the bottom

Select Element 68 - resize by 12%

Paste and position on the bottom right

Select Element 13 - resize by 15%

Paste and position on the bottom right

Select Element 50 - resize by 15%

Paste and position on the bottom

Select Element 51 - resize by 40%

Paste and position on the right side

Select Element 29 - resize by 40%

Paste and position on the canvas where desired

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Wednesday, November 29, 2017

CHIC SANTA



Supplies needed:

I am using the stunning artwork from Lysisange for this tutorial which you can find here

Scrapkit: I am using a stunning kit from A Lil Mz Brainstorm called "Chic Santa" which you can get by going here

Mask 1 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 29, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 69

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 6

Select invert, delete, select none

Move paper layer below frame layer

Select Element 90 - resize by 85%

Paste and position on the top right

Select Element 10 -

Paste and position on the left side

Select Element 19 - resize by 30%

Paste and position on the right side

Select Element 55 - resize by 30%

Paste and position on the bottom right

Select Element 58 - resize by 50%

Paste and position on the top right

Apply Eyecandy Gradient Glow on fat default settings (Glow Width 2)

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 74 - resize by 25%

Paste and position on the bottom left

Select Element 66 - resize by 20%

Paste and position on the bottom left

Select Element 20 - resize by 40%

Paste and position on the bottom

Select Element 79 - resize by 20%

Paste and position on the bottom

Select Element 67 - resize by 20%

Paste and paste on the bottom right

Select Element 54 - resize by 25%

Paste and position on the bottom right

Select Element 13 - resize by 40%

Paste and position on the center where desired

Select Element 11 - resize by 75%

Paste and position on the canvas where desired

Add new raster layer and flood-fill with color of choice

Apply Mask 1 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Sunday, November 26, 2017

SAD SAD AUTUMN



Supplies needed:

I am using the stunning artwork from Andy Cooper for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Chili's Designz called "Sad Sad Autumn" which you can get by going here

Mask 4 from Dee which you can find here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 26, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Frame Element 5 - resize by 75%

Paste and position in the center of the canvas

Select your magic wand tool and select the center of the frame (Add (Shift), RGB Value, Tolerance 25, Contiguous checked, Feather 0)

Selections, Modify, Expand by 5

Paste paper 8

Select invert, delete, select none

Move paper layer below frame layer

Select Berries Element - resize by 55%

Paste and position on the top right

Select Tree Element - resize by 65%

Image mirror and paste on the left side

Select Cloud2 Element - resize by 55%

Paste and position on the top left

Select WA Element - resize by 40%

Paste and position on the top left

Apply Eyecandy Gradient Glow on fat default settings (Glow width 3)

Select Owl 2 Element - resize by 30%

Paste and position on the top left

Select Leaves Element - resize by 50%

Paste and position on the top of the canvas where desired

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Girl Element - resize by 30%

Paste and position on the bottom left

Select Nut Element - resize by 30%

Paste and position on the bottom left

Select Mushroom 4 Element - resize by 20%

Paste and position on the bottom left

Select Deco 4 Element - resize by 25%

Paste and position on the bottom

Select Pumpkin Element - resize by 30%

Paste and paste on the bottom

Select Kitten Element - resize by 40%

Paste and position on the bottom

Select Rain Element - resize by 55%

Paste and position on the canvas where desired

Select Flower Element - resize by 30%

Paste and position on the bottom

Select Soil Element - resize by 50%

Paste and position on the bottom above frame layer

Paste paper 9 on the canvas

Apply Mask 4 or mask of choice

Merge group and move to the bottom layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

STEAMPUNK MELISA



Supplies needed:

I am using the stunning artwork from Alehandra Vanhek for this tutorial which you can find here

Scrapkit: I am using a stunning kit from Bibi's Collections called "Steampunk Melisa" which you can get by going here

Plugins: Lokas 3D Shadow
----------------------------

This tutorial is written for those who have working knowledge of PSPX2 (any version will do).

This tutorial was written by me on November 26, 2017. Please do not copy or paste on any other forum, website or blog provide link back to tut only. Please do not claim as your own. This tutorial is copyrighted to me. Any resemblance to any other tutorial is purely coincidental.

Ok - let's start and remember to save often.

Open up a 750 x 650 blank canvas (we can resize it later)

Select Element 44 - resize by 45%

Paste and position in the center of the canvas

Select Frame Element 65 - resize by 55%

Paste and position in the center of the canvas

Reposition where desired

Select Element 58 - resize by 35%

Paste and position on the top right

Select Element 78 - resize by 20%

Paste and position on the bottom right

Select Element 89 - resize by 40%

Paste and position on the top of the canvas

Select Element 26 - resize by 20%

Paste and position on the top left

Select Element 34 - resize by 50%

Paste and position on the bottom left

Paste tube of choice where desired

Apply Lokas 3D Shadow at default settings

Select Element 72 - resize by 10%

Paste and position on the right side

Select Element 67 - resize by 40%

Paste and position on the bottom right

Select Element 68 - resize by 25%

Paste and position on the bottom right

Select Element 3 - resize by 15%

Paste and position on the left side

Select Element 4 - resize by 20%

Paste and position on the bottom left

Select Element 59 - resize by 30%

Paste and paste on the bottom below tube layer

Select Element 20 - resize by 10%

Paste and position on in the center below tube layer

Add any dropshadows you like

Sharpen any elements as needed

Crop and resize as desired

Add copyright info, license number and name

You're done! Thanks for trying my tutorial!

Search

Followers

My Blinkies

Lee's Creationz


Favorite Blogs







 photo milliespspmadness_zps1b81d2e9.gif